Important note: The information here is not warranted. Each writer has contributed his or her own opinions and experience for the benefit of other Nor'Sea owners and does so with the caveat that should you have difficulties implementing these suggestions or as a result of using them, the writer accepts no blame nor offers any warranty or redress. Please proceed at your own risk.
All material here is used by permission. They may be printed out for your own use. They may not be printed out for others or for distribution, however; if you wish to use them for this purpose, separate permissions must be obtained from each writer. Thank you for observing copyright protection.
Has anyone installed an Autohelm 2000 on the tiller? I checked their directions of following the rudderstock up to the tiller and came to a position about three inches forward of the end of the rudder. This does not seem right, as the control unit would have to be almost off the stern. I have not contacted the manufacturer yet, but thought I would ask other NorSea owners. Thanks for any replies.